Launch offer — valid today only

📄 Digital book in PDF · read it on your phone or print it

Passive Fire Protection Illustrated Read Every FRL, Wall, Fire Door and Penetration in the Same Order

For passive fire work in Australia, with the Queensland and NSW licensing side covered: FRLs, fire-rated walls and ceilings, fire doors part by part, collars and wraps, sealants and batts, fire dampers, inspection and records. Every topic has its own page: the drawing first, then the numbers you need to remember. 64 illustrated pages.

SHOW ME THE PAGES

🔒 Secure checkout · PDF by email · 30-day guarantee

Every topic, its own pageEach element drawn, with the explanation right beside it
64 illustrated pages8 parts, from active vs passive fire to the final review map
Up-to-date sourcesNCC Volume One, AS 1530.4, AS 1905.1 and AS 4072.1
PDF by emailFormat

Look Inside the Book

Every page has a large drawing and a box with the numbers and steps you need to know:

–/60/30 = no structural adequacy needed, 60 min integrity, 30 min insulation
–/60/30 = no structural adequacy needed, 60 min integrity, 30 min insulation
Type A floors run from 90/90/90 to 240/240/240 by class; every core hole needs a tested seal.
Type A floors run from 90/90/90 to 240/240/240 by class; every core hole needs a tested seal.
Downlights and access panels in fire-resisting ceilings need a tested system; Spec 13 doesn't cover them.
Downlights and access panels in fire-resisting ceilings need a tested system; Spec 13 doesn't cover them.
Leaf, frame, hinges, lock, closer, seals and tags: one doorset tested to AS 1905.1 and AS 1530.4
Leaf, frame, hinges, lock, closer, seals and tags: one doorset tested to AS 1905.1 and AS 1530.4
Tray through a 120-minute wall: tray, bundle size, wall and FRL must match the report.
Tray through a 120-minute wall: tray, bundle size, wall and FRL must match the report.
Fire damper vs smoke damper: what each one does, what triggers it, how to tell them apart
Fire damper vs smoke damper: what each one does, what triggers it, how to tell them apart
Service → element + FRL → tested system → install → label → record
Service → element + FRL → tested system → install → label → record
Test report, manufacturer instructions, current NCC, your regulator: use the book with them
Test report, manufacturer instructions, current NCC, your regulator: use the book with them

Swipe to see more →

These are real pages from the book. The table of contents is the full one: 8 parts and 60 topics.

The Problem Isn't You. It's How It Was Explained to You.

You're standing under a fire-rated wall in a Class 2 block. The ceiling's already in, and the certifier asks how far up that wall has to go, and why.

You've read it before. But the manual gives it to you as paragraphs of clauses, types of construction and exceptions, and nothing shows you where the wall actually stops.

Downlights and access panels in fire-resisting ceilings need a tested system; Spec 13 doesn't cover them.

In this book it's one page: the wall drawn running past the ceiling to the floor or roof above, and the 450 mm above a combustible roof marked in a box, for Types B and C.

The same goes for the top-of-wall joint, the fire door gaps, the collar on a PVC pipe and the fire damper: each one has its own page.

You see it, you understand it, and you can explain it on site without going back to the manual.

COMPARE FOR YOURSELF

The Same Topic, Two Ways to Study It

THIS
  • The manual: line after line
  • Wall systems explained only in words
  • You walk into the assessment still unsure
A fire-resisting plasterboard wall system shall be constructed in accordance with the tested prototype, including stud gauge, depth and spacing, the type and fixing of the top and bottom track, the number, thickness and type of plasterboard layers, the fastener type and spacing for each layer, and the staggering of joints between successive layers, since the fire resistance level attributed to the system derives from the assembly as tested and not from any individual component, and any departure from the documented configuration may invalidate the stated FRL.
FOR THIS
  • The wall system in one drawing
  • The layers and joints in a box
  • You see it and you get it
Type A floors run from 90/90/90 to 240/240/240 by class; every core hole needs a tested seal.
CONTENTS

Take a Look at the 8 Parts and 60 Topics

How passive fire works, FRLs and the NCC, walls, floors and ceilings, fire doors, service penetrations, ducts and dampers, inspection and records, and a final review: 64 pages, all illustrated.

IHow passive fire works · pp. 5-11
  1. Active vs passive fire protection
  2. Compartmentation: boxes inside the building
  3. How fire and smoke travel
  4. The tested system rule
  5. Who's who on a passive fire job
  6. Licensing in Queensland and NSW
  7. Words you must use correctly
IIFRLs and the NCC · pp. 12-19
  1. Reading an FRL: 120/120/120
  2. What the dash means: -/60/30
  3. Structural adequacy
  4. Integrity
  5. Insulation
  6. How fire tests are run
  7. Building class and type of construction
  8. Where the NCC sets the FRLs
IIIWalls, floors and ceilings · pp. 20-27
  1. A fire-rated plasterboard wall, layer by layer
  2. How high the wall must go
  3. Deflection head and top-of-wall joint
  4. Masonry and concrete walls
  5. Fire-rated floors and slabs
  6. Fire-protective and fire-rated ceilings
  7. Control joints and linear gaps
  8. Smoke walls vs fire walls
IVFire doors part by part · pp. 28-36
  1. A fire doorset is a system
  2. The door leaf
  3. The frame and how it's fixed
  4. Door gaps in millimetres
  5. Hinges, locks and latching
  6. Self-closing and door closers
  7. Seals: intumescent and smoke
  8. Hold-open devices and automatic release
  9. Tags, labels and signage
VService penetrations: the 6-step method · pp. 37-46
  1. The 6 steps, always in the same order
  2. Step 1: identify the service
  3. Step 2: the element and its FRL
  4. Step 3: match a tested system
  5. Fire collars on plastic pipes
  6. Wraps on metal and insulated pipes
  7. Sealants, mortars and batts
  8. Cables, bundles and trays
  9. Step 5: labelling the penetration
  10. Step 6: what you record
VIDucts, dampers and other openings · pp. 47-51
  1. Fire dampers: how they close
  2. Installing a fire damper
  3. Smoke dampers vs fire dampers
  4. Access panels, downlights and boxes
  5. Fire windows, shutters and curtains
VIIInspection, maintenance and records · pp. 52-58
  1. How to inspect in the same order every time
  2. Routine service of passive fire
  3. Inspecting a fire door
  4. Inspecting penetrations
  5. Writing a defect clearly
  6. NSW fire safety statements and Queensland occupier's statements
  7. Records that hold up
VIIIReview and site checklist · pp. 59-64
  1. The most common installation errors
  2. Five questions the assessor often asks
  3. Penetration method on one page
  4. Fire door check on one page
  5. What this book does not replace
  6. Final review map

One Page, One Topic, All Clear

Think of it this way:

A plumber has just run a 100 mm PVC stack through a 150 mm slab and you've got the collar in your hand. The assessor, or the builder, wants to know why that collar and not another one.

You open the page on fire collars and see the pipe drawn going through the slab with the collar in place, and the four things that must match the test report: material, diameter, element and FRL.

Tray through a 120-minute wall: tray, bundle size, wall and FRL must match the report.

Same with the dash in –/60/30, the wall that runs to the floor or roof above, the fire door gaps in millimetres and the six steps for a fire damper: each one on its own page.

Passive Fire Protection Illustrated is 8 parts and 64 illustrated pages, one topic per page, and it finishes with a review section: the most common installation errors and the site checks on one page each.

What you see drawn, you don't have to memorize.

What's Inside Passive Fire Protection Illustrated:

Ipp. 5-11

How passive fire works

Active vs passive, compartmentation, how fire and smoke travel, the tested system rule, who's who on the job, licensing in Queensland and NSW and the words to use correctly.

IIpp. 12-19

FRLs and the NCC

Reading an FRL, what the dash means, structural adequacy, integrity and insulation, how fire tests are run, building class, type of construction and where the NCC sets the FRLs.

IIIpp. 20-27

Walls, floors and ceilings

The plasterboard wall layer by layer, how high it must go, the deflection head, masonry and concrete walls, slabs, fire-protective and fire-rated ceilings, control joints and smoke walls.

IVpp. 28-36

Fire doors part by part

The doorset as a system: leaf, frame and fixing, gaps in millimetres, hinges and latching, closers, intumescent and smoke seals, hold-open devices, tags and signage.

Vpp. 37-46

Service penetrations: the 6-step method

The 6-step method for every penetration: the service, the element and its FRL, the tested system, collars, wraps, sealants and batts, cables and trays, labels and records.

VIpp. 47-51

Ducts, dampers and other openings

How fire dampers close and how they're installed, smoke vs fire dampers, access panels, downlights and boxes, fire windows, shutters and curtains.

VIIpp. 52-58

Inspection, maintenance and records

Inspecting in the same order every time, routine service, fire doors and penetrations, writing a defect clearly, fire safety statements in Queensland and NSW, and records that hold up.

VIIIpp. 59-64

Review and site checklist

The most common installation errors, five questions assessors often ask, the penetration method and the fire door check on one page each, and a final review map.

At the end of the book: A review section with the most common installation errors, plus the penetration method and the fire door check on one page each.

Plus: 2 Free Books

Passive Fire Practice Questions

BONUS 1: «Passive Fire Practice Questions»

Value on its own: US$ 17.90

Exam-style questions with worked answers on FRLs, fire doors, penetrations and inspection, so you can check what you really know before your assessment.

Passive Fire Quick-Reference Cards

BONUS 2: «Passive Fire Quick-Reference Cards»

Value on its own: US$ 14.90

The key ideas of every chapter on printable cards, so you can revise in ten minutes or keep them in the ute for site.

Passive Fire Protection Illustrated with 2 Free Books

  • Passive Fire Protection Illustrated: 64 illustrated pagesUS$ 63
  • BONUS 1: Passive Fire Practice QuestionsUS$ 17.90
  • BONUS 2: Passive Fire Quick-Reference CardsUS$ 14.90
  • High-resolution PDF to printIncluded
Total value US$ 95.80
YOUR PRICE:
US$ 27
You save US$ 68.80
YES, I WANT PASSIVE FIRE PROTECTION ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.

Secure purchaseEncrypted payment30-day guarantee

PDF by email: We email you Passive Fire Protection Illustrated as a PDF, together with the two free books. It's a single payment: no installments, no extra charges.

Who This Book Is For

You're studying for your licence or accreditation

You're studying for your licence or accreditation

Every topic you've been reading as clauses is now a drawing with the key numbers next to it, so it makes sense after a day on site.

Your assessment is coming up

Your assessment is coming up

The review section and the practice questions let you check what you can really explain: FRLs, fire doors, penetrations and inspection.

You already work in passive fire

You already work in passive fire

Print the one-page checks and keep them in the ute: the penetration method and the fire door gaps, in the same order on every job.

Everything You Get Today

US$ 95.80US$ 27
YES, I WANT PASSIVE FIRE PROTECTION ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.

30DAYS
GUARANTEE

30-Day Guarantee

Try Passive Fire Protection Illustrated for 30 days, bonus books included.

We refund everything if the file won't open, if the book isn't what you see here, if you were charged twice or if the email doesn't arrive. Just email us.

You pay once. No subscriptions.

Frequently Asked Questions

Is it for me if I already do passive fire work and need the licence?

Yes. It's written for people who already do the job and need to explain it in the language of the code: FRLs, tested systems, fire doors, penetrations and inspection. The NCC and Australian Standards pages apply across Australia; the licensing and fire safety statement pages cover Queensland and NSW. It starts from the basics but moves on fast.

Where does the content come from?

From the current NCC Volume One (Section C and its Specifications), AS 1530.4, AS 1905.1, AS 4072.1, AS 1682 and AS 1851, plus the Queensland and NSW licensing and accreditation requirements. Every clause number and interval is flagged so you can check it against the current official version.

Is it official material?

No. It's an independent study guide. It's not affiliated with or endorsed by the QBCC, NSW Fair Trading, FPA Australia, the ABCB, Standards Australia or any regulator.

Does it replace the course or the required training?

No. It's study material and a site reference. It doesn't give you a licence, an accreditation, a certificate or CPD points, and it doesn't replace the training your licence requires. On every job, the tested system documentation and the manufacturer's installation instructions come first: the book shows you how to read them and what to check.

Are the practice questions the ones in the assessment?

No. They're written for this book to help you check what you know. They aren't official questions from any assessment.

When and how do I get it?

The book and the 2 bonus books come as PDFs by email, to the address you enter at checkout.

Do I have to pay every month?

No. It's a one-off payment. No subscription.

Can I have it on paper?

Yes. It's a PDF, so you can print it at home or at a print shop and take it to site.

How does the refund work?

You have 30 days. We refund everything if the file won't open, if the book isn't what you see on this page, if you were charged twice or if the email doesn't arrive: just email us.

Before You Close This Page

No more rereading with nothing sticking.

The wall, the fire door and the collar: you see them drawn and it clicks.

You get to your assessment knowing where everything is.

Drawings make studying faster.

The book is right below.

One-time payment: US$ 27 · Guarantee: 30 days · PDF by email

YES, I WANT PASSIVE FIRE PROTECTION ILLUSTRATED FOR US$ 27

📄 This is a digital PDF book sent to your email: nothing is printed or shipped.